Vaporfi Pro 3

Vaporfi Pro 3 Starter Kit Review No ratings yet.

Published On August 23, 2016 | By Nicole | Product Reviews
Overall Score
85 %

Our favorite thing about this vape pen was how simple and easy it was to use.

Vapour 90%
Innovation 75%
Price 80%
Battery Life 85%
Design 85%

Vaporfi Pro 3 Starter Kit Review

The Vaporfi Pro 3 is essentially a new and upgraded version of the Vaporfi Pro 2 – which was admittedly a pretty good vape pen. We  also reviewed their Vaporfi Vice device earlier this year, which we also liked.

But when we saw that the Pro 3 was out and ready for use, we were excited to see if it was any better than its predecessor – and honestly, it didn’t disappoint!

We managed to get our hands on one and give it a try, and this review is about this experience – both the good and the bad.

Here’s what we thought about the Vaporfi Pro 3 starter kit.

Pros and Cons

Here are the basic pros and cons that we discovered over the course of our research…

Pros

  • The kit seemed well-built and well-put-together
  • It produced plenty of vapour and quality flavour
  • It comes in 8 different colors
  • It has a top-fill tank design, which we really liked
  • It’s super simple and easy to use

Cons

  • The buttons on our pen rattled around a bit
  • There’s no variable airflow controller

Attention! You will automatically SAVE 10% from all Vaporfi products a part of their E-liquids by clicking on the link below.

What’s in the starter kit?

The starter kit comes with the battery, the tank, a micro USB charging lead, extra o-ring seals (which we were super-happy to see), and a spare atomizer coil. These coils are 2.0 ohm coils, so you get one in the tank and an extra in the starter kit.


Specifications

The tank looked beautiful. The drip tip screws off to allow for top-filling. This will allow you to fill the entire tank without having a bunch of empty space. The coils are quite large – but we liked the look of them. They’re filled with organic cotton, and seem to work pretty well.

The instruction booklet was surprisingly well-laid-out. It provided simple, yet detailed instructions for how to break down the tank – which was nice to see.

The battery was what we looked at next. It felt quite light to us, and the buttons rattled a bit – which we weren’t so impressed with. The color was perfectly matched to the tank, as was expected – so that’s good. The micro-USB charging port on the battery is located on the side of the device, so you can stand it up while you charge it.

Turning on the battery is as simple as pressing the button 3 times. The battery and the tank are easy to connect to each-other, and the resulting assembled device looked great and felt good in the hand.

Filling the tank up with E-liquid was pretty easy with the top-fill design. We got sent through some Vaporfi E-liquid to try with the device, which is what we used to test the Vaporfi Pro 3 – and we rather liked it. It was a 50/50 PG/VG E-liquid. It was a pear, lemon, and vanilla flavour – which was very nice!

Information!  When filling this device, do not get E-liquid down the center! Make sure that you pour the E-liquid to the sides, and not directly into the coil! Also make sure to let it sit for 5-10 minutes after filling it up before you start vaping, to allow time for the wick to absorb enough E-liquid to avoid dry hits.

One thing that we didn’t find on this device that we would have liked to see was an airflow controller of some kind. Granted, there were grooves to allow for battery/connector airflow, but not adjustable airflow for vaping – so that was a bit of a downside for us.

But then again, it should be understood that this isn’t a sub-ohm or advanced device. It’s a simpler vape pen designed more for beginners than advanced vapers – so it makes sense that they would keep things simple.

  • 5ml tank capacity
  • 1000mAh lithium ion battery
  • Atomizer resistance of 2.0 ohms
  • Battery voltage: 3.5 volts
  • Top-fill tank design
  • Ships with a 4 pack of o-ring seals and a charging cable
  • Comes in 8 different colors
This vape pen comes equipped with 510 threading.

What did we think of this starter kit?

After filling the pen with E-liquid, we gave it 5-10 minutes to allow the wick to soak up some E-liquid – then we gave it a try.

The device itself seemed very well constructed and sturdy. We actually got the stainless steel device as well, and liked it a bit more than the red – but the red color was very well-done and nice. This was simply a preferential thing on our part.

The Pro 3 was simple to operate. You just push the button to vape. The flavour was really, really good. And for a 2.0 ohm coil, we were impressed by the amount of vapour it produced. It’s not too much, especially for a beginner who is starting out. It’s really the perfect blend of flavour and vapour for someone who is just getting a feel for electronic cigarettes.

The batteries are probably going to last about two days for the average vaper – and they charge quickly, so battery life is pretty good. You’ll also need to get some extra coils, but they’re cheap and easy to get from Vaporfi – which is nice.

Our opinion on this kit is that it deserves to be highly recommended – especially for a beginner or an advanced vaper who wants to have a smaller, extra pen to stick in their pocket or take on-the-go.


Improvements from the previous version

This kit offers several upgrades from the previous version. The Pro 2 featured a smaller 650mAh battery, and had an output voltage of 3.7 volts. The atomizer that it featured was also different. It was rated at 1.5 ohms.


Appearance and Feel

Our first impression of the box and packaging was positive. It looked high in quality, and well-made. This device comes in quite a few different colors, which is pretty cool. The battery and the tank are both in smaller separate boxes inside of the kit box, so everything was neat and protected.

ECIGSUK Vaporfi Pro 3 sample

The red color that we got was super bright! It really looked good though, in our opinion. We were pretty pleased with the look and feel of the device.

  • Airflow

There are some small grooves machined into the bottom of the tank to help keep things cool around the battery connection, which was nice to see.

Unfortunately, however, there was no variable airflow controller – which we saw as a bit of a downside.

  • Material

This device is made mostly of steel and glass. Overall, the construction seemed sound to us.

  • Ease of Use

It doesn’t have much for settings – but because of this, it would be super easy for a beginner to pick it up and use it. For that reason, we would certainly recommend it for people who are new to vaping, as well as for intermediate and advanced vapers who need an inexpensive, yet quality vape pen that’s smaller and easier to take on-the-go than other devices.

Highlights

Our favorite thing about this vape pen was how simple and easy it was to use. We also loved how much vapour it produced. For a 2.0 ohm coil, this thing delivered some impressive clouds!

Drawbacks

The biggest drawbacks to the device were that the buttons seemed to rattle a bit, and that it didn’t have a variable airflow control.

Company Address and Contact Details

The official company address for Vaporfi is as follows…

14300 Commerce Way, Miami Lakes, FL 33016

You can also contact them via phone at 1-855-938-2767, or through an e-contact form on the Customer Support page.


Additional recommended products from this company

Vaporfi sells packs of coils on their website that you can buy at a discounted price – and we would certainly recommend picking one up when you order the Vaporfi Pro 3 Starter Kit, as coils don’t last forever and need to be replaced pretty regularly.

Attention! Our 10% voucher code will automatically be applied once you click on the link below. Note: discount will be added on all products a part of Vaporfi E-liquids.

Please rate your personal experience if you have tried this PRODUCT / BRAND yourself

About The Author

It's my passion to do the research about familiar to me topics, especially when it comes to electronic cigarettes and the whole vaping industry as such. I hope you will find my content useful and when / if you do - please do share it! I will appreciate it! :) See our ''Who We Are'' page to find out more about me and my colleagues. Thanks and I look forward to your comments and feedback.

Leave a Reply

Your email address will not be published. Required fields are marked *